ITI Qualification jobs and Exam Questions

1. What type of thread lead screw of lathe has ________________ a) Acme   b) Square c) Whit worth  d) Butters Answer: b) Square 2. In a riveted joint the edges of plates are simply laid over each other and riveted.  This joint is called a) Butt joint b) Lap joint c) Edge joint d) Corner joint Answer: b) Lap joint 3. While drilling the drive is overhated due to its a) Drill point is not in centre  b) Cooling is sufficient c) Cutting speed is too high d) Rough holes  Answer: c) Cutting speed is too high 4. In which method of manual bending of sheet metal the folding line is to coincide with edge  of bending tool? a) Folding bar method b) C' clamp and hardwood c) Angle iron and 'C' clamp  d) Hatched stake method' Answer: d) Hatched stake method' 5. The body of aeroplane is made of aluminum because to its ________ a) weight b) Melting point  c) Point  d) Colour  Answer:  a)...

1. Which fastener has threading on both sides__________  a) bolt b) nut c) screw d) stud Answer:  d) stud 2. Which fastener is weeding  a) temporary b) semi-permanent c) Permanent  d) None of three Answer:  c) Permanent  3. What is an angle of angle plate _____________  a) 30 degree b) 45 degree c) 60 degree d) 90 degree Answer:  d) 90 degree

* Which one of the following is the formula for size to form 100% thread? a) Major dia-TPI x 1/pitch b) Major dia-1.5 x pitch c) Majordia-2 x depth of thread d) Major dia-TPI x pitch * While assembling using bolt and nuts, we use the correct length of bolt. The nut is passed through mini a) At least two threads on the bolt b) at least Ten threads on the bolt c) At least five threads on the bolt d) at least four threads on the bolt e) None of the above * Spring washers are used infer nut to prevent a) Damage to the bolt b) Damage to the nut c) Damage to the parts of the equipment d) Slackness of nut due to vibration e) None of the above * The pipe reamer is used to ream the pipe-Reaming is done after ______ a) pipe cutting b) Male thread cutting c) male thread cutting d) pipe bending e) None of the above * In a shaping machine with mechanical driven ram the ram speed is not uniform________ a) At the beginning of the cutting stroke b) In ...